Safely Flash a Mesa Board

I've made some improvements to the Mesa Configuration Tool II to verify that the board selected and the address selected are the same as the connected board. With these checks you can't flash the wrong firmware to a Mesa board.

I've also added a board discovery feature that can save you time trying to figure out if you have the board connected as you wanted.



All mesaflash functions use the same checks as those shown in the video.

JT

Magnificent!
Thank you.

Hello. I have a Mesa7i92TH and I need a pinout for a Chinese board (mach3 interface board) 5Axis Breakout Board. 4 encoders and four axes. Why is there no 7i92t_5abob_encd.bin firmware in Mesa Configuration Tool II (I installed it via the terminal)? Maybe I need different firmware? 7i92t_7i85sx2d.bin, but it's not there either)))
Thank you very much for your help.

I just updated the 7i92t firmware to include all the latest firmware from Mesa. Select the 7i92t and then Downloads > Firmware to get the latest.

Edit: I also updated the 5i25t, 7i76eu, 7i95t, 7i96s and 7i97t firmware.

JT