7i76e

D.Ballew
Topic Author
Offline
New Member

2 years 11 months ago #284762 by D.Ballew

7i76e was created by D.Ballew

Hey guys I have a question about the power for the board. I had a issue that messed up my stepper drive chip. On the board and I sent to pcw and they are a awsome group of people. When I got the board back. And hooked everything up I got to noticing a issue (not due to repair the board was working great) Now my question is...will the board run on 12v power supply?

Please Log in to join the conversation.

tommylight
Away
Administrator

2 years 11 months ago #284770 by tommylight

Replied by tommylight on topic 7i76e

From the Mesa 7i76E manual:

Code:

The 7I76E can get its 5V Ethernet, encoder, step/dir and serial interface power from
connector P3 or the on card logic power regulator can be used with unregulated DC power
supplied to TB3. When the on card regulator is used, the maximum power available from
the encoder, serial, and 26 pin expansion connectors is 2A total. If isolation of field power
and logic power is not required, a common 8 to 32VDC power supply can be used for all
7I76E power.

So yes it does work with 12V.
Mind the polarity.

Please Log in to join the conversation.

Time to create page: 0.160 seconds