change p2 7i92t_5abobx2d.pin

telmoram
Topic Author
Offline
Junior Member

2 years 11 months ago #285069 by telmoram

change p2 7i92t_5abobx2d.pin was created by telmoram

Hi, please can you help me changing the 7i92t_5abobx2d.pin firmware, I need only one encoder this in the P1 connector, and the P2 connector (P11, P12, P13) only as IOport for use inputs. Thanks.

Please Log in to join the conversation.

PCW
Offline
Platinum Member

2 years 11 months ago #285070 by PCW

Replied by PCW on topic change p2 7i92t_5abobx2d.pin

Encoder pins are available as GPIO inputs so no special firmware is
needed unless you want to use those pins as outputs.

Please Log in to join the conversation.

telmoram
Topic Author
Offline
Junior Member

2 years 11 months ago #285098 by telmoram

Replied by telmoram on topic change p2 7i92t_5abobx2d.pin

Thanks, I change the hal file and work.

Please Log in to join the conversation.

Time to create page: 0.103 seconds