7I96 Encoder Spindle tuning

More
2 years 7 months ago #295147 by PCW
Replied by PCW on topic 7I96 Encoder Spindle tuning
Yes, except P3 is left unconnected

Please Log in to join the conversation.

More
2 years 7 months ago #295795 by kbec
Replied by kbec on topic 7I96 Encoder Spindle tuning
So like this:
 

Attachment not found



I have a 12V power supply passing through a buck converter to get it to the 6V

Please Log in to join the conversation.

More
2 years 7 months ago #295798 by PCW
Replied by PCW on topic 7I96 Encoder Spindle tuning
That looks correct, make _VERY_ sure the 12V supply has no connection to GND

Please Log in to join the conversation.

Time to create page: 0.046 seconds
Powered by Kunena Forum