7i95 T for pwm 6 axis

More
2 years 8 months ago #294360 by Nathan40
7i95 T for pwm 6 axis was created by Nathan40
Hi all. I was wondering if anyone can help with bit files for 6 axis PWM OUTPUTS all axis for 7i95t board and 5 axis BOB PWM Outputs for 7i95t boards. Thanks in advance

Please Log in to join the conversation.

More
2 years 8 months ago #294381 by PCW
Replied by PCW on topic 7i95 T for pwm 6 axis
I can do that but need to know what I/O is desired on the 5ABOB.

Please Log in to join the conversation.

More
2 years 8 months ago #294395 by Nathan40
Replied by Nathan40 on topic 7i95 T for pwm 6 axis
Thanks so much for your reply.
A. I want it replace all the stepgens 2,3, 4,5,6,7 with pwm in the 5 axis bob bit file found on the mesa website.
B. Also please share for 6 axis pwm bit file for all the stepgens.

Please Log in to join the conversation.

More
2 years 8 months ago #294398 by PCW
Replied by PCW on topic 7i95 T for pwm 6 axis
Still not clear to me.

Normally a 7I95T would have stepgens 0..5 on TB3 and TB4
 Do you want these replaced with PWMgens?

 Or do you want a standard 7I95T with 6 stepgens  on TB3 and TB4
and a 5ABOB config for P1 with 6 PWMgens (no direction pins)
on DB25 pins 2,3,4,5,6,7?
 

Please Log in to join the conversation.

More
2 years 8 months ago #294401 by Nathan40
Replied by Nathan40 on topic 7i95 T for pwm 6 axis
I want two bit files.
A. That's correct. I want to replace all 6 stepgens with 6 pwmgens.
B. That's again correct. All stepgens changed to pwmgens for 6 axis (7i95T board) + 3 axis (BOB). In all 9 pwmgens.
 

Please Log in to join the conversation.

More
2 years 8 months ago #294405 by PCW
Replied by PCW on topic 7i95 T for pwm 6 axis
OK I can do this later today (flea market time now)

Please Log in to join the conversation.

More
2 years 8 months ago #294407 by Nathan40
Replied by Nathan40 on topic 7i95 T for pwm 6 axis
Ok..

Please Log in to join the conversation.

More
2 years 8 months ago #294453 by PCW
Replied by PCW on topic 7i95 T for pwm 6 axis
 

Attachment not found


 

Please Log in to join the conversation.

More
2 years 8 months ago #294484 by Nathan40
Replied by Nathan40 on topic 7i95 T for pwm 6 axis
Thank you so much. It works great.
For original 7i95 board (not the T or S version), please can you share a similar file with pwmgens on BOB and 6 axis . Can't find it on mesa website. Thanks!

Please Log in to join the conversation.

More
2 years 8 months ago #294535 by PCW
Replied by PCW on topic 7i95 T for pwm 6 axis
 

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.107 seconds
Powered by Kunena Forum