7c81 x 7i85s firmware help

More
2 years 8 months ago #294666 by weedsmoker
what's up everyone I saw that PCW made some firmware to make this work the only problem is I need PWM instead of Step Direction. Is there any chance him or someone else could make me the bit file? if not any advice on how to do that myself would be greatly appreciated.

Please Log in to join the conversation.

More
2 years 8 months ago #294714 by PCW
Replied by PCW on topic 7c81 x 7i85s firmware help
What specific I/O do you need?
Just a 7I85S with 4 sets of PWM/Dir instead of Step/Dir?
 

Please Log in to join the conversation.

More
2 years 8 months ago #294727 by weedsmoker
yep I only plan on connecting one 7i85s and a single smart serial card :)

Please Log in to join the conversation.

More
2 years 8 months ago #294745 by PCW
Replied by PCW on topic 7c81 x 7i85s firmware help
 

Attachment not found



4 PWM/DIR on first 7I85S, 4 stepgens on (probably unused) second

Please Log in to join the conversation.

More
2 years 7 months ago #295189 by weedsmoker
sorry for the late reply, thanks for the firmware! I should finally have time to test it out tomorrow.

Please Log in to join the conversation.

More
2 years 7 months ago #295547 by COFHAL
Replied by COFHAL on topic 7c81 x 7i85s firmware help
Could you help me with a firmware version to use pktUART on one of the RS 485/422 ports.

Please Log in to join the conversation.

More
2 years 7 months ago #295555 by PCW
Replied by PCW on topic 7c81 x 7i85s firmware help
Is this for just one 7I85S?

Please Log in to join the conversation.

More
2 years 7 months ago #295583 by COFHAL
Replied by COFHAL on topic 7c81 x 7i85s firmware help
Not for direct connection at port 7c81

Please Log in to join the conversation.

More
2 years 7 months ago #295587 by PCW
Replied by PCW on topic 7c81 x 7i85s firmware help
I don't understand what firmware you want
 

Please Log in to join the conversation.

More
2 years 7 months ago #295593 by COFHAL
Replied by COFHAL on topic 7c81
Does the 7c81 card have any standard firmware that supports pktUART?

Please Log in to join the conversation.

Time to create page: 0.496 seconds
Powered by Kunena Forum