Will a 7i97T work with in a 3axis teknic setup

Hello,  I am curious if a 7i97T will work in a mill configuration with 3 axis using teknic servos.  Eventually I want to be able to control the spindle speed from linux cnc but that will come later.  Will a 7i97T work on my setup?

Thanks in advance 

What kind of drives does the machine have?

they are teknic clearpath servos.

X and Y have SDSK-3421S-RLN
teknic.com/model-info/CPM-SDSK-3421S-RLN/

and the Z has a SDSK-3432S-RLN
teknic.com/model-info/CPM-SDSK-3432S-RLN/

Those are step/dir drives so a 7I97T is not appropriate but a
7I96S would work.

Thank you so much. I am purchasing now. Do I need anything else from mesa?

I also have a brake (for the Z) that takes 24v and an omron 24v power supply. 
teknic.com/products/spring-applied-power...rakes/NEMA-34-brake/

I have 3 of these cables (also have 3 ipc5 power supplies and the power cord for them)
teknic.com/cpm-cable-ctrl-mu120/

 

Not from Mesa but you will need a 5V power supply and an Ethernet cable