New update on STMBL

More
2 years 3 weeks ago #311638 by Freak
Replied by Freak on topic New update on STMBL
Yes I can send some complete prototypes boards (rev5.0), and yes I'm in Europe.
I left the contacts at the end of the readme in the repo.

Please Log in to join the conversation.

More
2 years 2 weeks ago #311767 by Freak
Replied by Freak on topic New update on STMBL
Here are some boards I finished assembling and tested, they seems to perform very well, I will share the video of a big robotic arm (3 ton) running with these. The motion is smooth and very quiet.

Please Log in to join the conversation.

More
2 years 2 weeks ago #311773 by tommylight
Replied by tommylight on topic New update on STMBL
Those look tasty! :)
What would be a good price per unit of assembled and tested drives?

Please Log in to join the conversation.

More
2 years 2 weeks ago #311785 by Freak
Replied by Freak on topic New update on STMBL
Write here for more info
[img

Please Log in to join the conversation.

More
2 years 2 weeks ago #311786 by tommylight
Replied by tommylight on topic New update on STMBL
That is a nice price, very nice in fact, considering how everything has gone up.
Thank you very much, but for now i can not buy any ...
One of the reasons is here: :)
forum.linuxcnc.org/54-user-exchange/5403...-sale?start=0#311679

Please Log in to join the conversation.

More
2 years 2 weeks ago #312062 by Freak
Replied by Freak on topic New update on STMBL
Here some pic assembled with the case.
Much more space in the cabinet now
[img

Please Log in to join the conversation.

More
2 years 2 weeks ago #312068 by Todd Zuercher
Replied by Todd Zuercher on topic New update on STMBL
Looks nice!

Please Log in to join the conversation.

More
1 year 7 months ago #324094 by Overspeed
Replied by Overspeed on topic New update on STMBL
I have a Kuka kr200 robot and its motors are brake motors between 1.5~kw and 4.5kw. My robot does not have its own board. I want to make it with STMBL. I need a guide. Probably via Mach3.

Please Log in to join the conversation.

More
1 year 7 months ago #324097 by Aciera
Replied by Aciera on topic New update on STMBL
You might want to start by looking at the documentation:
freakontrol.github.io/stmbl/docs/introduction/

Seems it's max power output is 2.2kW and apparently does not provide a command interface that is compatible with Mach3:

 

Attachment not found

Please Log in to join the conversation.

More
1 year 7 months ago #324110 by Overspeed
Replied by Overspeed on topic New update on STMBL
but how is that possible there are a lot of sample videos with mach3 stmbl v4

Please Log in to join the conversation.

Time to create page: 0.061 seconds
Powered by Kunena Forum