hm2/hm2_7i92.0: Error finishing read!

More
1 year 11 months ago #314192 by PCW
Replied by PCW on topic hm2/hm2_7i92.0: Error finishing read!
31 s32 RW 235371 servo-thread.tmax

So the maximum servo thread time is ~ 1/4 of the servo period so looks fine.

Please Log in to join the conversation.

More
1 year 11 months ago #314227 by angelnu
Replied by angelnu on topic hm2/hm2_7i92.0: Error finishing read!
Thank you for your help. Yesterday the router was working for three hours without any problem.

Please Log in to join the conversation.

More
1 year 11 months ago #314263 by PCW
Replied by PCW on topic hm2/hm2_7i92.0: Error finishing read!
You can keep tabs on how much margin you have
by looking at the tmax values after long LinuxCNC
uptimes. My guess is that it's unlikely you will see
the error again.

Please Log in to join the conversation.

Time to create page: 0.100 seconds
Powered by Kunena Forum