Pi5 on MEASA 7C80 5V power source

ccatlett1984
Topic Author
Offline
Junior Member

1 year 9 months ago #317748 by ccatlett1984

Pi5 on MEASA 7C80 5V power source was created by ccatlett1984

Thanks for the info. I'll use the usb-c, as I have a touchscreen attached (has it's own 5v power) that I don't want to pull from the Pi and overdraw the MESA.

Please Log in to join the conversation.

PCW
Offline
Platinum Member

1 year 9 months ago #317750 by PCW

Replied by PCW on topic Pi5 on MEASA 7C80 5V power source

The safest way is to use the USB-C

That said, the 7C80 power supply does work with a RPI5
(I measured around 2.3 Amps when LinuxCNC was running)

Please Log in to join the conversation.

ccatlett1984
Topic Author
Offline
Junior Member

1 year 9 months ago #317751 by ccatlett1984

Replied by ccatlett1984 on topic Pi5 on MEASA 7C80 5V power source

Thanks for the info. I'll use the usb-c, as I have a touchscreen attached (has it's own 5v power) that I don't want to pull from the Pi and overdraw the MESA.

Please Log in to join the conversation.

Time to create page: 0.083 seconds