7i84

GDTH
Topic Author
Offline
Senior Member

1 year 5 months ago #327435 by GDTH

7i84 was created by GDTH

He,

I have a 7i84 connected to a 7i77. Lcnc can see the device but the red is always on and I am not able to control the outputs. Could it because I only have 24v connected to vin. Does the field a and b niet power?

Thanks

Please Log in to join the conversation.

PCW
Offline
Platinum Member

1 year 5 months ago #327436 by PCW

Replied by PCW on topic 7i84

The 7I84 needs VFIELDA VFIELDB and VIN

Suggested wiring is to power VFIELDA and VFIELDB and leave W1 in the default
left hand position, so VIN get powered via VFIELDB.

Please Log in to join the conversation.

Time to create page: 0.073 seconds