Xilinx Zynq 7010 fpga crypto windfall boards

Ah well ATM everything's out of budget.

wow, you made so much progress compared to me! i only managed to boot it and connect to it using ethernet to check that its working. it came with crypto software installed which has web server and dhcp configured so i managed to connect to it via browser using ip address.  
now i am waiting for proper jtag that recognized by vivado to start playing with it. 
i too thought about potentially running linuxcnc on zynq but i suspect those cores are just too slow at 600mhz.
I actually like vivado. wouldn't it be nice to have cnc modules (step gens, counters, pwm etc) set as ip blocks in vivado so it can be just visual drug and drop to create configuration you need. 
 

this waveshare thing working fine with vivado:
www.amazon.de/dp/B00KM70UFG?ref=ppx_yo2ov_dt_b_fed_asin_title

if you only need to load the bitfile, you can use the installed linux-system.

i know that someone in this forum has running linuxcnc on an raspberry-zero 2 with sdl gui,
this is not so fare away from this cores.

## I actually like vivado. wouldn't it be nice to have cnc modules (step gens, counters, pwm etc) set as ip blocks in vivado so it can be just visual drug and drop to create configuration you need. File Attachment:

hmmm, maybe we can convert some rio plugins into vivado blocks
at the moment the complete rio part is shown as one block in vivado.

blocks.tcl

[/code]

easier than expected

but rio is much more than the bitfile generation, it creates the interfaces and linuxcnc configuration.

it would be nice to have a visual editor in rio-setup like the vivado block designer

Nice work mate

you got some nice looking board with a heatsink, mine came as if it was found in a dumpster, with dust and corrosion. but surprisingly
it works fine. i agree this is a bargain considering specs with zynq 7010. 
 
 
 

i can see you configured its zynq ethernet  GMII module in vivado, does it work? have you tried it with lwIP examples to check if udp transport works?

Hello everyone, I got interested in this topic and found this post