Mesaflash 3.4.9 shows "Unsupported ethernet device 7I76EU" despite successful pi

Using   with a Mesa 7i76EU (IP  ). Ping works, but:mesaflash --device 7i76eu --addr 192.168.1.121 --readhmid
Unsupported ethernet device 7I76EU at 192.168.1.121
No 7I96S board found
Also tried with IP   after moving jumper W14 up
mesaflash --device 7i76eu --addr 10.10.10.10 --readhmid Is the 7i76EU supported? How to fix "Unsupported device"? 

Use the latest version of mesaflash
github.com/LinuxCNC/mesaflash
Scroll down for info on how to install.

thanks a lot Tommy,
i’m trying to control two servo drives (Modbus RTU) with a Mesa 7i76EU in LinuxCNC, but I can’t use Classic Ladder or PktUART

Moved to "driver boards" section.

AdelRTP wrote:

thanks a lot Tommy,
i’m trying to control two servo drives (Modbus RTU) with a Mesa 7i76EU in LinuxCNC, but I can’t use Classic Ladder or PktUART

Have you spotted the new Modbus / PktUART driver? It's more flexible that mesa_modbus. (but only exists in the dev version of LinuxCNC) 

linuxcnc.org/docs/devel/html/man/man1/mesambccc.1.html
linuxcnc.org/docs/devel/html/man/man9/hm2_modbus.9.html
 

Hi andypugh,
i dont know how to flash the pktUART, i dont know how to download it, i want to use it to control mr-je driver from Mitsubishi
 

You would load the 7I76eu firmware that includes PKTUart support

7i76eu_7i76x1_pktv3d.bin

This file is in the 7i76eu.zip archive downloaded from Mesa's store (in the specifications tab)

You program it with mesaflash, something like:

mesaflash --device 7i76eu --addr 10.10.10.10 --write 7i76eu_7i76x1_pktv3d.bin --reload

 

where can i find it ?

store.mesanet.com/index.php?route=produc...oduct&product_id=399
Click on the specifications tab

Thanks bro, I try to download it several times but didn't work, until i use an other pc problem in my pc