Mesa 7I76eu with linuxcnc 2.8.2

Hi guys, is there any way to get a 7I76eu card working with linuxcnc 2.8.2? I need to replace a 7I76e card on an old pc where there are a lot of scripts in python 2.7... thanks for any advice

A 7I76EU should work on any system that supports a 7I76E.

Older (Pre-7I76EU) versions of LinuxCNC will complain about
an unrecognized card, but this does not affect operation.

 

PCW, thank you for fast reply, attached is the on start error report, with mesa 7I76e, there is no problem.Any idea how to fix it, please?    

Try hm2_7176.0.watchdog.timeout_ns

Thank you very much! Now it works.
Any idea how to support linuxcnc community?

JiKr wrote:

Any idea how to support linuxcnc community?

You can start by using the "Recent Topic" at the top of the forum and see if you can help anyone asking for help, or if you are good with code you can check the project page on GitHub.
Thank you for the offer.