Tarjeta mesa 7i96s se desconecta

More
1 year 3 days ago #337339 by Johnnysacalu
Hola, tengo un plasma CNC con la tarjeta mesa7i96s Estuvo cortando bien hasta ahora y de repente se desconecta pone que ha perdido la señal con la tarjetahm2/hm2-7196s.0: error finishing read! iter=309265 me pone esto 

Please Log in to join the conversation.

More
1 year 3 days ago #337348 by PCW
What PC do you have, and what is the result of:

sudo chart 99 ping -i .001 -q -c 60000 [card_ip_address]

Where [card_ip_address] is the IP address of the 7I96S (Either 192.168.1.121 or 10.10.10.10)

Please Log in to join the conversation.

More
1 year 3 days ago #337353 by Johnnysacalu
Ip address is 10.10.10.10 es un ordenador un poco viejo y la verdad no se como hacer (sudo chart 99 ping -i .001 -q -c 60000 [card_ip_address]) esto me sale not found

Please Log in to join the conversation.

More
1 year 3 days ago #337356 by PCW
Sorry, typo

sudo chrt 99 ping -i .001 -q -c 60000 [card_ip_address]
 

Please Log in to join the conversation.

More
1 year 3 days ago #337357 by Johnnysacalu
 

Attachment not found

 

Attachment not found

Please Log in to join the conversation.

More
1 year 3 days ago #337358 by Johnnysacalu
 

Attachment not found

Attachment not found


no se como hacerlo

Please Log in to join the conversation.

More
1 year 3 days ago #337359 by tommylight
sudo chrt 99 ping -i .001 -q -c 60000 10.10.10.10

Please Log in to join the conversation.

More
1 year 2 days ago #337360 by Johnnysacalu
 

Attachment not found

Please Log in to join the conversation.

More
1 year 2 days ago #337361 by PCW
Not terrible but not great either

If the PC has a Realtek Ethernet chip you will likely need to install the 8168-DKMS driver

If you don't know the Ethernet chip type you can run this script:

 

Attachment not found



To run:

download

then

chmod +x edrivers.txt

and finally

./edrivers.txt
 

Please Log in to join the conversation.

Time to create page: 0.313 seconds
Powered by Kunena Forum