7i76EU+7i85+7i84U

rodw wrote:

I drew up my own pin out diagram converting the wire colours to be correct and my 7i73 woke up!

Did it sleep well ?

Yes, it was sleeping for days before it received the kiss of life!

Yes, it may be a cable issue.

Just verified that:

7i76eu_7i76x1_7i85x1d.bin from the distribution zip file.

md5 checksum:

485114d3d22390a7e5b44d77588981c5  7i76eu_7i76x1_7i85x1d.bin

Works correctly with a 7I85 on P1 (all 5 sserial ports on the 7I85 work correctly)

Is it possible you have a 7I85S rather than 7I85?





 

It's supposed to be a 7i85 not a 7i85s. I'll have to check it in the morning.
I'll also have to check the piece of patch cable I used. It's possible the cable could be suspect.

I have it working now. I had my serial cable wired wrong. (I had the polarity of the RX and TX wires wrong.)