[newbie] Conversion of 3 axis mill to linuxcnc

8 years 10 months ago #103168 by EMFab01

Replied by EMFab01 on topic [newbie] Conversion of 3 axis mill to linuxcnc

was it working with the linuxcnc?

Please Log in to join the conversation.

8 years 10 months ago #103172 by cgo

Replied by cgo on topic [newbie] Conversion of 3 axis mill to linuxcnc

Sorry, It never went that far.

Please Log in to join the conversation.

Time to create page: 0.069 seconds