Shizuoka AN-S Retrofit Advice Needed

And for some pics

Here's a video from when I was making a part for the 4th axis


vid279.photobucket.com/albums/kk138/dlus...B-62034FEBF12C_1.mp4

Hi Dale,
I am in the midst of a conversion of almost the same machine. I have schematics, manuals, code, trials and tribulations on my web site here:

sites.google.com/site/yeltrow/shizuoka-a...-linuxcnc-conversion

I am currently in the process of adding discrete I/O to my Shizuoka AN-S via a Wago 750-842 ethernet module and ModTCP (Modbus over IP). My VFD on serial modbus is a honeybadger--Power On/Off whenever and it always restores communications. I have yet to find a way to reinitialize ModTCP connections to the Wago I/O without restarting EMC.

I’m about to start virtually the same conversion on my Shizuoka ST-N, has the same Bandit and motors. Do you still have that documentation available? The above link doesn’t seem to work.

The wayback machine might help.
web.archive.org/web/*/https://sites.goog...linuxcnc-conversion*