My first cnc router of wood (MDF)

my first cut is done - Dust collection / shoe :woohoo: :woohoo: :woohoo:





nice cut, milling cutter was cold after milling and the noise is acceptable. The vacuum cleaner is louder then the cnc router



I know, it's not perfect, but it's my first cnc router I was building. It's only a prototype to test the hardware and so on, the next parts of wood are at home. I had problems to put the holes for screws and stepper motors, as sample, on the right place. I used only a simple drilling machine, so now I think the parts will be a lot better and then I'll build the cnc router again.

Looks good!

Rick G