Retrofiting a Paxton/Paterson Training Center Mill.

tommylight
Offline
Administrator

9 years 5 months ago #93640 by tommylight

Replied by tommylight on topic Retrofiting a Paxton/Paterson Training Center Mill.

For those BOB's the base thread has to be near or at 100.000 or they just do not work. That is if using paraport.
Sorry if i missed something, been busy lately.

Please Log in to join the conversation.

Livoniany
Topic Author
Offline
New Member

9 years 5 months ago #93648 by Livoniany

Replied by Livoniany on topic Retrofiting a Paxton/Paterson Training Center Mill.

Hello Thank you everyone for your help. My friend and I bypassed the board and ran it directly from the parallel cable. The axis ran as expected.

Please Log in to join the conversation.

Livoniany
Topic Author
Offline
New Member

9 years 5 months ago #93649 by Livoniany

Replied by Livoniany on topic Retrofiting a Paxton/Paterson Training Center Mill.

Hello Thank you everyone for your help. My friend and I bypassed the board and ran it directly from the parallel cable. The axis ran as expected.

Please Log in to join the conversation.

Time to create page: 0.158 seconds