kotlikm wrote: For example id like it to blow air for 2sec, off for 2sec, blow for 2sec, etc.
It's pretty easy.
First set up a "
siggen
" component making a square wave at the right frequency, and just leave that running contnuously.
Then create an "
and2
" component where one input is the square wave and the other is the coolant-flood output.
The output of the and2 will pulse at the siggen frequency only when coolant is on.
For more flexibility you could use a "
mux_generic
" component of type bit with 4 inputs and 2 select bits.
(loadrt mux_generic config=bb4)
Wire one select to
coolant-flood
and one to
coolant-mist
.
Then,
Code:
setp mux-gen.0.in-bit-00 0
setp mux-gen.0.in-bit-01 1
net pulse siggen.0.clock => mux-gen.0.bit-02-in
setp mux-gen.0.in-bit-03 1
net flood iocontrol.0.coolant-flood mux-gen.00.sel-bit-00
net mist iocontrol.0.coolant-mist mux-gen.00.sel-bit-01
This will give continous for coolant-flood, pulse for coolant-mist, and continuous for both (but it would be possible to do something else with both-on)
