Mini wannabe datron build

More
1 year 9 months ago #318613 by tivoi
Replied by tivoi on topic Mini wannabe datron build
a bit tricky with the hsk stand, it needs to be very precise

Please Log in to join the conversation.

More
1 year 9 months ago #318615 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
What is tricky?

Please Log in to join the conversation.

More
1 year 9 months ago #318620 by tivoi
Replied by tivoi on topic Mini wannabe datron build
sorry
i mean tool change need precise

Please Log in to join the conversation.

More
1 year 9 months ago #318627 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
ah yes. That's not too big of an issue with this design, but its also complicated with lots of parts too.

Please Log in to join the conversation.

More
1 year 9 months ago #318999 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
one step closer
 

Attachment not found



definitely needs a servo with a brake though. designed a little adapter.
 

Attachment not found



Alternate atc option. this might be the one we end up with. best mix of simplicity, being out of the work area and holding 10 tools.
 

Attachment not found

Please Log in to join the conversation.

More
1 year 9 months ago #319927 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Spindle running, but needs tuning. skimmed the table with it though. also got some new vises.

 

Attachment not found

Please Log in to join the conversation.

More
1 year 9 months ago #320058 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Just a conservative test cut



(I'm not even joking, that's 30% spindle load!)

Please Log in to join the conversation.

More
1 year 9 months ago #320086 by tommylight
Replied by tommylight on topic Mini wannabe datron build
Datron is gona be pissed.... :)

Please Log in to join the conversation.

More
1 year 9 months ago #320118 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Tormach will be more pissed, cause if I manage to do this right, it will directly compete with the 440 and 770 as a higher performance alternative if you don't need to make heavy steel cuts.

Please Log in to join the conversation.

More
1 year 9 months ago #320119 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Dreaming of jerk control now :P

haha

(cant test grotius's yet on this machine cause i need to get some work done)

Please Log in to join the conversation.

Time to create page: 0.332 seconds
Powered by Kunena Forum