Flood victim retrofit.

M4MazakUser wrote:

Have ordered several mesa boards,  looks like a long wait on mesa servo drive boards... anyone have success interfacing in to a fanuc keypad? It has 2x 50 pin headers and a 25pin female serial plug. I'll pinout it soon.

If you are lucky the headers connect directly into the key matrix. 

andypugh wrote:

M4MazakUser wrote:

Have ordered several mesa boards,  looks like a long wait on mesa servo drive boards... anyone have success interfacing in to a fanuc keypad? It has 2x 50 pin headers and a 25pin female serial plug. I'll pinout it soon.
If you are lucky the headers connect directly into the key matrix. 

Though it is possible that the serial data might be usable, depending on what it looks like. 

Found this info today,  explains what the pinout for fanuc keypads is.
hope this helps someone else!