sinmerik 820

More
4 years 3 months ago #248373 by omarF8985
sinmerik 820 was created by omarF8985
I have a CNC lathe with the Sinumerik 820 command, it hasn't worked for two years.
When I turn on the machine, the fan in the electrical cabinet and the control comes on but nothing happens, the control panel and the screen do not light up.
Help me please.
Thanks.
youtube.com/shorts/OaOPtwbc3ok

Please Log in to join the conversation.

More
4 years 3 months ago #248424 by Todd Zuercher
Replied by Todd Zuercher on topic sinmerik 820
Start by checking fuses, then power supplies.

Please Log in to join the conversation.

More
4 years 3 months ago #248428 by radom
Replied by radom on topic sinmerik 820
have you tried pressing the green button under the red/yellow estop button?

Please Log in to join the conversation.

More
4 years 3 months ago #248516 by omarF8985
Replied by omarF8985 on topic sinmerik 820
yes, it dosn't work.

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum