midyo wrote: There's no point in trying a milling PP for turning...
I see your point, and it doesn't work
Code:
Information: Configuration: Generic Enhanced Machine Controller (EMC)
Information: Vendor: LinuxCNC
Information: Posting intermediate data to '/Users/andypugh/Desktop/1.ngc'
Error: Failed to post process. See below for details.
...
Start time: Tue Mar 29 00:19:26 2016
Loading locale from '/Users/andypugh/Library/Application Support/Autodesk/webdeploy/production/d4d665b18a1a3c20a11aed6876e70e3961deaea3/Libraries/Applications/CAM360/Data/Posts/common.en.lang'
Post processor engine: 4.2.1 40528
Configuration path: /Users/andypugh/Library/Application Support/Autodesk/webdeploy/production/d4d665b18a1a3c20a11aed6876e70e3961deaea3/Libraries/Applications/CAM360/Data/Posts/emc.cps
Include paths: /Users/andypugh/Library/Application Support/Autodesk/webdeploy/production/d4d665b18a1a3c20a11aed6876e70e3961deaea3/Libraries/Applications/CAM360/Data/Posts
Configuration modification date: Tue Feb 9 02:30:40 2016
Output path: /Users/andypugh/Desktop/1.ngc
Checksum of intermediate NC data: 5308d15a3b526f2dc2bd7aa64d3e0f78
Checksum of configuration: 518e4afdb6539a4135bd23c50059eb28
Vendor url: http://www.linuxcnc.org
Legal: Copyright (C) 2012-2016 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.1939
...
Error: Turning toolpath is not supported by the post configuration.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error: Failed to invoke 'onOpen' in the post configuration.
Error:
Error: Failed to execute configuration.
Stop time: Tue Mar 29 00:19:26 2016
Post processing failed.
One option might be to configure for Fanuc-style toolchanges (there is a sim config that demonstrates that) and use the Fanuc-turrning post-processor.
It is possible to edit post-processors in Inventor, but I am not sure if you can in Fusion.
