Mastercam/Linux Post

More
10 years 2 months ago #79603 by Jena Lynn
Mastercam/Linux Post was created by Jena Lynn
Hi everyone, I'm helping a friend getting his new Probotix Fireball to talk/run. The machine is 47 miles away from me, and all I can get to work on it Aspire/Vectric. Mastercam would be ideal. There are a couple of Mastercam posts I found, but can't test them easily without traveling. Could someone take a look, and maybe try this out running high over the table and see what errors pop up if any?. It is just a contour of 5 inches long and 1.5 inches wide stepping down -.2 at .07 depth each pass. Thank you all for your time.

Please Log in to join the conversation.

More
10 years 2 months ago #79613 by tommylight
Replied by tommylight on topic Mastercam/Linux Post
No attachment ??? :ohmy:

Please Log in to join the conversation.

More
10 years 2 months ago #79617 by Jena Lynn
Replied by Jena Lynn on topic Mastercam/Linux Post
Here is the code, thank you all.
Code:
% (PROGRAM NAME - MASTERCAM TESTING FILE) (28-08-16_09:49) (MCX FILE - T) (NC FILE - C:\USERS\DAD\DESKTOP\MASTERCAM TESTING FILE.CNG) ( T1 | 1/2 STRAIGHT BIT | H2 ) N10 G17 G20 G90 G40 G80 G49 N20 G90 G92.1 M5 N30 G64 P0.05 Q0.05 N40 M61 Q1 N50 ( MSG, TOOL DIA. - .5 ) N60 G0 G53 Z0. N70 G0 G90 G54. X-2.7652 Y-.7503 N80 S10000 M3 G4 P0.5 N90 Z.1 N100 G1 Z-.05 F5. N110 Y-.2504 F75. N120 G3 X-2.7656 Y-.25 I-.0004 J0. N130 G1 X-5.5311 N140 G2 X-5.7811 Y0. I0. J.25 N150 G1 Y1.4945 N160 G2 X-5.5311 Y1.7445 I.25 J0. N170 G1 X0. N180 G2 X.25 Y1.4945 I0. J-.25 N190 G1 Y0. N200 G2 X0. Y-.25 I-.25 J0. N210 G1 X-2.7656 N220 X-2.7856 N230 G3 X-2.7859 Y-.2504 I0. J-.0004 N240 G1 Y-.7503 N250 Z.05 F5. N260 G0 Z.5 N270 X-2.7652 N280 Z.05 N290 G1 Z-.1 N300 Y-.2504 F75. N310 G3 X-2.7656 Y-.25 I-.0004 J0. N320 G1 X-5.5311 N330 G2 X-5.7811 Y0. I0. J.25 N340 G1 Y1.4945 N350 G2 X-5.5311 Y1.7445 I.25 J0. N360 G1 X0. N370 G2 X.25 Y1.4945 I0. J-.25 N380 G1 Y0. N390 G2 X0. Y-.25 I-.25 J0. N400 G1 X-2.7656 N410 X-2.7856 N420 G3 X-2.7859 Y-.2504 I0. J-.0004 N430 G1 Y-.7503 N440 Z0. F5. N450 G0 Z.5 N460 X-2.7652 N470 Z0. N480 G1 Z-.15 N490 Y-.2504 F75. N500 G3 X-2.7656 Y-.25 I-.0004 J0. N510 G1 X-5.5311 N520 G2 X-5.7811 Y0. I0. J.25 N530 G1 Y1.4945 N540 G2 X-5.5311 Y1.7445 I.25 J0. N550 G1 X0. N560 G2 X.25 Y1.4945 I0. J-.25 N570 G1 Y0. N580 G2 X0. Y-.25 I-.25 J0. N590 G1 X-2.7656 N600 X-2.7856 N610 G3 X-2.7859 Y-.2504 I0. J-.0004 N620 G1 Y-.7503 N630 Z-.05 F5. N640 G0 Z.5 N650 X-2.7652 N660 Z-.05 N670 G1 Z-.2 N680 Y-.2504 F75. N690 G3 X-2.7656 Y-.25 I-.0004 J0. N700 G1 X-5.5311 N710 G2 X-5.7811 Y0. I0. J.25 N720 G1 Y1.4945 N730 G2 X-5.5311 Y1.7445 I.25 J0. N740 G1 X0. N750 G2 X.25 Y1.4945 I0. J-.25 N760 G1 Y0. N770 G2 X0. Y-.25 I-.25 J0. N780 G1 X-2.7656 N790 X-2.7856 N800 G3 X-2.7859 Y-.2504 I0. J-.0004 N810 G1 Y-.7503 N820 Z-.1 F5. N830 G0 Z.5 N840 X-2.7652 N850 Z-.1 N860 G1 Z-.25 N870 Y-.2504 F75. N880 G3 X-2.7656 Y-.25 I-.0004 J0. N890 G1 X-5.5311 N900 G2 X-5.7811 Y0. I0. J.25 N910 G1 Y1.4945 N920 G2 X-5.5311 Y1.7445 I.25 J0. N930 G1 X0. N940 G2 X.25 Y1.4945 I0. J-.25 N950 G1 Y0. N960 G2 X0. Y-.25 I-.25 J0. N970 G1 X-2.7656 N980 X-2.7856 N990 G3 X-2.7859 Y-.2504 I0. J-.0004 N1000 G1 Y-.7503 N1010 Z-.15 F5. N1020 G0 Z.5 N1030 X-2.7652 N1040 Z-.15 N1050 G1 Z-.3 N1060 Y-.2504 F75. N1070 G3 X-2.7656 Y-.25 I-.0004 J0. N1080 G1 X-5.5311 N1090 G2 X-5.7811 Y0. I0. J.25 N1100 G1 Y1.4945 N1110 G2 X-5.5311 Y1.7445 I.25 J0. N1120 G1 X0. N1130 G2 X.25 Y1.4945 I0. J-.25 N1140 G1 Y0. N1150 G2 X0. Y-.25 I-.25 J0. N1160 G1 X-2.7656 N1170 X-2.7856 N1180 G3 X-2.7859 Y-.2504 I0. J-.0004 N1190 G1 Y-.7503 N1200 Z-.2 N1210 G0 Z1. N1220 G0 G53 Z0. M5 N1230 G28 N1240 %

Please Log in to join the conversation.

More
10 years 2 months ago #79619 by tommylight
Replied by tommylight on topic Mastercam/Linux Post
I do not know if it would matter in that machine, but mine would not run it as it travels at -150mm on X axis ( 6 inches).
Everything else seems OK
The negative limit on my machines is always set at 30 to 50mm, never more, except Z axis as that works in negative.
Here is a screen shot,

Please Log in to join the conversation.

More
10 years 2 months ago #79631 by Jena Lynn
Replied by Jena Lynn on topic Mastercam/Linux Post
Thank you, Tom. Getting it to read the code without errors is half the battle without trying to run it. If my lead in and out were smaller, and on the -Y- side, it might have helped you. Thank you again for your time and efforts.

Please Log in to join the conversation.

More
10 years 2 months ago #79632 by tommylight
Replied by tommylight on topic Mastercam/Linux Post
You are welcomed, always.

Please Log in to join the conversation.

More
10 years 2 months ago #79695 by Jena Lynn
Replied by Jena Lynn on topic Mastercam/Linux Post
If anyone needs a Mastercam post for EMC2, it is here. It runs a Probotix Fireball Router easily.

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.091 seconds
Powered by Kunena Forum