SolidCam 2016 postprocessor for LinuxCNC 3 axis router

Hi guys, please can tell me what post processor to use in SolidCam 2016 for a LinuxCNC 3 axis router, working area 1100x660x15 mm
Thanks in advance.
Regards
Rob.

Hard to say without the software or a list.

Is there one that mentions "EMC2" by any chance? That was the old name for linuxCNC.

Any chance you got this figured out? I need the same post and the Github and generic Fanuc posts some people recommend throw a bunch of errors. I am using 2017 of SW and SC and 2.7 of LinuxCNC. I am just dong 3 axis milling.

Thank you for any help in advance and I hope your setup is running great.

What errors? You might be able to make LinuxCNC work with those posts by re-mapping or adding G and M-codes.

Admittedly a post that worked without would be better.

I have a solidcam post specifically written for linuxcnc and solidcam.

It's for a router. 3 axis

Router + 4th axis rotary: 4 axis.