Impellar Turbine made in FreeCAD

hi
i decided to make a Quick speed advice on how to get a turbine modeld in FreeCAD
with Sweep Blade

Is there a usable CAM module for FreeCad ?
Nice tutorial, thank you.

Yes, I have used it to produce g-code for a machine a couple of times. But I am far from proficient at using it.

tommylight wrote: Is there a usable CAM module for FreeCad ?
Nice tutorial, thank you.

This is an intro www.freecadweb.org/wiki/Path_Workbench

Sliptonic has several videos www.youtube.com/user/sliptonic/videos

I have used it for milling and like everything there is a learning curve.

here is a more moddern impellar
QUESTION can someone make G-code on Fusion
the licencening now does not allow to be lower Shop owners to be on

Yes, the Path workbench is a 3 axis cam generator. It works a lot like Fusion, not the very fine control that Fusion offers though.

There is a LinuxCNC post processor and it generates good code, it works on my homemade machine with almost no problems.

Path workbench:
www.freecadweb.org/wiki/Path_Workbench