cppcam: a CAD CAM software I'm working on

I would like some advice on how to publicize and advertise a desktop software I have been working on for some time. "cppcam" is a CAD/CAM software with a 3D CAD interface for generating G-Code toolpaths for LinuxCNC. It is open source and can be found at sourceforge. 
git clone git://git.code.sf.net/p/cppcam/code cppcam-code

I'm using this to generate efficient programs and beautiful work even though the interface is full of bugs and problems.

Moved to CAD CAM

I think the first step is to create a project page with some images and description, for example a GitHub project with a readme like this: github.com/DjangoReinhard/kutecam ( forum.linuxcnc.org/31-cad-cam/45456-simple-linux-cam ) or this:  pycam.sourceforge.net/
By the way, do you know the first project? It's also written in C++ so you may can get some inspiration or you can collaborate.
IMHO it would be better to concentrate the power on one project instead of having lot's of small ones (if it's possible).

 

HansU wrote:

IMHO it would be better to concentrate the power on one project instead of having lot's of small ones (if it's possible).
 

+1

I just had a look in the repository and the readme says:

This repository holds a port of pycam to C++/Qt. The project was then renamed to cppcam, and the git repository was lost and recreated.

Are you porting the project for performance reasons or what is the reason?

 

HansU wrote:

Are you porting the project for performance reasons or what is the reason?

That would be a good reason. I stopped using PyCAM when I realised that other solutions could create code in seconds that was taking PyCAM several hours. 

I gave it a shot and it looks promising. But it has not seen any development since 2022 in this repository.
Do you plan to further develop this?