Elecrical Schematic drawings

Roguish
Topic Author
Offline
Elite Member

4 years 3 months ago #247594 by Roguish

Elecrical Schematic drawings was created by Roguish

Ok, so what free programs are everyone using to draw out their electrical schematics?
Simple 2D......

LibreCad

QCad

FreeCAD

TinyCad

?????????

Please Log in to join the conversation.

arvidb
Offline
Platinum Member

4 years 3 months ago #247640 by arvidb

Replied by arvidb on topic Elecrical Schematic drawings

QElectroTech

Here's one example of what it can do.

Please Log in to join the conversation.

JT
Away
Administrator

4 years 3 months ago #247653 by JT

Replied by JT on topic Elecrical Schematic drawings

+1 for QElectroTech that's what I use.

JT

Please Log in to join the conversation.

Beef
Offline
Senior Member

4 years 3 months ago #247691 by Beef

Replied by Beef on topic Elecrical Schematic drawings

I'm quite a fan of TinyCAD - it's very simple to use and is straightforward for schematic drawing. I've not tried QElectroTech but that's the alternative that many others use.

Please Log in to join the conversation.

andypugh
Offline
Administrator

4 years 3 months ago #247926 by andypugh

Replied by andypugh on topic Elecrical Schematic drawings

I tend to use KiCAD as I have it and use it for PCB design too.

I have occasionally also used EasyEDA as that is handy when ordering from JLCPCB as that (and their parts catalogue) is built in.

But KiCAD is the Linux / FOSS option.

Please Log in to join the conversation.

Time to create page: 0.084 seconds