ViaConstructor - Free and Opensource CAM for Linux and Mac

More
4 years 1 month ago #252500 by meister
ViaConstructor - Free and Opensource CAM for Linux and Mac was created by meister
Source-Code:
github.com/multigcs/viaconstructor

Demo-Video:



 

Please Log in to join the conversation.

More
4 years 1 month ago #252847 by tommylight
Replied by tommylight on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
I gave it a try on one of my PC's, it installed vut did not run, will try again whenever i get some time.
This was on Linux Mint 20.?, not sure what exact version that PC is using.
Probably Python versions as Mint uses quite old versions of it.
It seems to be very nice and easy to use, thank you.

Please Log in to join the conversation.

More
4 years 1 month ago #252876 by hottabich
Replied by hottabich on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
Works on macOS High Sierra. Installed according to the instructions.

Please Log in to join the conversation.

More
4 years 4 weeks ago #253145 by phillc54
Replied by phillc54 on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
A small issue, straight leadins or leadouts start on the wrong side of the cut, swapping the additions and subtractions in if lead_in_active == "straight": and if lead_out_active == "straight": appears to work ok.
Arcs seem to be ok.
 

Please Log in to join the conversation.

More
4 years 4 weeks ago #253156 by tommylight
Replied by tommylight on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
Plasma cutting = no lead outs.

Please Log in to join the conversation.

More
4 years 4 weeks ago #253159 by phillc54
Replied by phillc54 on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
Uncheck the leadout box?

Please Log in to join the conversation.

More
4 years 4 weeks ago #253160 by tommylight
Replied by tommylight on topic ViaConstructor - Free and Opensource CAM for Linux and Mac

Uncheck the leadout box?
That should work! :)
Did not check it yet as it did not work on Mint 20.2, now i have to see if it works on Mint 21 and i also have a laptop with the official 2.8.4 ISO installed.

Please Log in to join the conversation.

More
4 years 4 weeks ago #253208 by phillc54
Replied by phillc54 on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
I am running it on a mac. My buster VM only has python 3.7 and this needs 3.9 or later.

Please Log in to join the conversation.

More
4 years 4 weeks ago #253214 by tommylight
Replied by tommylight on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
Works on Mint 21.

Please Log in to join the conversation.

More
4 years 3 weeks ago #253425 by meister
Replied by meister on topic ViaConstructor - Free and Opensource CAM for Linux and Mac
@ phillc54

i have not been able to recreate the mouse problem on mac. if it still does not work, can you send me your configuration and or your test file

'straight lead in/out' is fixed, thanks !

 

Please Log in to join the conversation.

Time to create page: 0.103 seconds
Powered by Kunena Forum