ElecrtoKraft encoder adapter for common 58mm encoders

smc.collins
Topic Author
Offline
Platinum Member

3 years 6 months ago #268695 by smc.collins

ElecrtoKraft encoder adapter for common 58mm encoders was created by smc.collins

figured these might be useful for someone, these will adapt the common 58mm encoders from several manufactures to the ElectroKraft and maybe other servos. fits on the 1.125 center hole etc. I attached the fusion360 project file as well.

Please Log in to join the conversation.

Time to create page: 0.133 seconds