As the CNC conversion of my mill is nearing completion I started reading through the G-code documentation of LinuxCNC and came across what I think might be typo.
On the page linked
here
it says:
- 5210 - 1 if "G52" or "G92" offset is currently applied, 0 otherwise. Volatile by default; persistent if DISABLE_G92_PERSISTENCE = 1 in the [RS274NGC] section of the INI file.
- 5211-5219 - Shared "G52" and "G92" offset for X, Y, Z, A, B, C, U, V & W. Volatile by default; persistent if DISABLE_G92_PERSISTENCE = 1 in the [RS274NGC] section of the INI file.
Shouldn't it say that the parameter in question are persisted by default and volatile only if "DISABLE_G92_PERSISTENCE = 1"?
