Network in Arch linux

Hello guys.
Sorry i cannot get solution to my problem.
I have all software ready in my arch linux, but i cannot connect my mesa board 7i95.
i configured:
/etc/systemd/network/20-wired.network

[Match]
Name=en*

[Network]
Address=10.10.10.255/24
Gateway=10.10.10.1

But it is not working.
When i do a ping 10.10.10.1 not work, i tried 10.10.10.10 too, and 192.168.1.121
What i am doing bad?
Someone can help to me?

Thank you.

isaac85 wrote:

[Network]
Address=10.10.10.255/24
Gateway=10.10.10.1

Address can not be 255.
It can be anything from 2 to 254, but NOT 10, and not 1 as it is used for gateways although it does work.

Thank's for repy!
I Get a solution and i want share it because someone can need this help.
I am trying run my linuxcnc in archlinux with mesa 7i95 board.

for get my connection with mesa board:

I have installed NetworkManager and net-tools

~ sudo pacman -S networkmanager net-tools

next you can use nmcli for see the devices that you have and the status.

~ nmcli device

In my case it will show my device eno2, type ethernet, state connecting (not connected)
so for connect it i need configure the ip

~ ip address add 10.10.10.10/24 dev eno2

next you can execute a ping for see it work now.

~ ping 10.10.10.10

I hope it help someone!!

Hugs!

Looks like you are pinging the interface on your PC, NOT the Mesa card. Read what Tommy said...