You have too many links in your message, please decrease them!

More
3 years 11 months ago #255693 by seuchato
You have too many links in your message, please decrease them! was created by seuchato
I get this error:
Code:
ErrorYou have too many links in your message, please decrease them!
There are no links when I tried to post here: forum.linuxcnc.org/21-axis/47258-can-t-i...ll-camview-in-buster .
did a search here. but noone seems to have had this problem.
Greez
chris

Please Log in to join the conversation.

More
3 years 11 months ago #255719 by tommylight
Replied by tommylight on topic You have too many links in your message, please decrease them!
Is that from a Windows PC?

Please Log in to join the conversation.

More
3 years 11 months ago #255833 by seuchato
Replied by seuchato on topic You have too many links in your message, please decrease them!
no, proper lcnc 2.84 install

Please Log in to join the conversation.

More
3 years 11 months ago #255840 by tommylight
Replied by tommylight on topic You have too many links in your message, please decrease them!
Any active addons on FireFox?

Please Log in to join the conversation.

More
3 years 11 months ago #255843 by seuchato
Replied by seuchato on topic You have too many links in your message, please decrease them!
yes, the usual stuff: noscript, adblocker ultimate; duckduckgo privacy essentials.
Any of these toxic?

Please Log in to join the conversation.

More
3 years 11 months ago #255855 by tommylight
Replied by tommylight on topic You have too many links in your message, please decrease them!
First two i use, so nothing there, the duck thing i do not use, so try disabling it for this forum.

Please Log in to join the conversation.

More
3 years 11 months ago #255860 by seuchato
Replied by seuchato on topic You have too many links in your message, please decrease them!
This is a test fro a machine without ddg stuff

 ls -l
insgesamt 23674676
-rw-r--r-- 1 ck users 4320133120 20. Jan 2021  2021-01-20-linuxcnc-pi4.img
-rwxrwxrwx 1 ck users 1649590272  9. Aug 2020  2.8_test4.iso
-rwxrwxrwx 1 ck users 2220474368 28. Sep 2020  cnc-19.3.0-rc3-20200921-xfce-h2-plus-uspace-64bit.iso
-rwxrwxrwx 1 ck users        467 26. Mai 2020  install.sh.zip
-rwxrwxrwx 1 ck users 2136997888 18. Sep 2020  linuxcnc-2.8.0-buster-200907.iso
-rwxrwxrwx 1 ck users 2155806720 28. Okt 2020  linuxcnc-2.8.0-buster.iso
-rwxrwxrwx 1 ck users 2136997888  7. Okt 2020  linuxcnc-2.8.0-buster-persist.iso
-rwxrwxrwx 1 ck users 1311376341 28. Sep 2020  linuxcnc-2.8.0-pi4.zip
-rwxrwxrwx 1 ck users 1946157056  6. Sep 2020  linuxcnc-2.8.0-pre3-buster.iso
-rw-r--r-- 1 ck users 1350005459 20. Feb 2022  linuxcnc-2.8.1-pi4.zip
-rwxrwxrwx 1 ck users 2181038080 16. Nov 2021  linuxcnc-2.8.2-buster.iso
-rw-r--r-- 1 ck users 2818572288  8. Okt 18:38 linuxcnc-2.8.4-buster.iso
-rwxrwxrwx 1 ck users   15395559 24. Mär 2020  LinuxCNC_Documentation.pdf
-rwxrwxrwx 1 ck users     307993 24. Mär 2020  LinuxCNC_Getting_Started.pdf

now code
Code:
[color=#000000]ls -l  [/color] insgesamt 23674676 -rw-r--r-- 1 ck users 4320133120 20. Jan 2021  2021-01-20-linuxcnc-pi4.img -rwxrwxrwx 1 ck users 1649590272  9. Aug 2020  [color=#18b218]2.8_test4.iso[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 2220474368 28. Sep 2020  [color=#18b218]cnc-19.3.0-rc3-20200921-xfce-h2-plus-uspace-64bit.iso[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users        467 26. Mai 2020  [color=#18b218]install.sh.zip[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 2136997888 18. Sep 2020  [color=#18b218]linuxcnc-2.8.0-buster-200907.iso[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 2155806720 28. Okt 2020  [color=#18b218]linuxcnc-2.8.0-buster.iso[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 2136997888  7. Okt 2020  [color=#18b218]linuxcnc-2.8.0-buster-persist.iso[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 1311376341 28. Sep 2020  [color=#18b218]linuxcnc-2.8.0-pi4.zip[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 1946157056  6. Sep 2020  [color=#18b218]linuxcnc-2.8.0-pre3-buster.iso[/color][color=#000000] [/color] -rw-r--r-- 1 ck users 1350005459 20. Feb 2022  [color=#b21818]linuxcnc-2.8.1-pi4.zip[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users 2181038080 16. Nov 2021  [color=#18b218]linuxcnc-2.8.2-buster.iso[/color][color=#000000] [/color] -rw-r--r-- 1 ck users 2818572288  8. Okt 18:38 linuxcnc-2.8.4-buster.iso -rwxrwxrwx 1 ck users   15395559 24. Mär 2020  [color=#18b218]LinuxCNC_Documentation.pdf[/color][color=#000000] [/color] -rwxrwxrwx 1 ck users     307993 24. Mär 2020  [color=#18b218]LinuxCNC_Getting_Started.pdf[/color]
tia
chris

Please Log in to join the conversation.

More
3 years 11 months ago #255861 by seuchato
Replied by seuchato on topic You have too many links in your message, please decrease them!
I'll be soon at the machine I definitely got the error messages

Please Log in to join the conversation.

More
3 years 11 months ago #255891 by seuchato
Replied by seuchato on topic You have too many links in your message, please decrease them!
Took a bit longer
Screenshot
 

Attachment not found



Failed test post source code from machine from which I reported the problem in attache file "too many lings.txt". What puzzles me, is the last line
Code:
[color=#000000]comments in next post[/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color][/color]
[/quote][/color]
[/code]

any idea?
 

Please Log in to join the conversation.

More
3 years 11 months ago #255894 by tommylight
Replied by tommylight on topic You have too many links in your message, please decrease them!
See the "source" button at the top left of the editor? Click on it.
I always do, this new editor is terrible for editing, so when there are links and HTML code, i do not bother editing, just make a new post.
It has a habit of putting all the tags at the very end...

Please Log in to join the conversation.

Time to create page: 0.208 seconds
Powered by Kunena Forum