Place to post Configurations? Hardinge CHNC retrofit

Dbsharp
Topic Author
Offline
Junior Member

2 years 11 months ago #284717 by Dbsharp

Place to post Configurations? Hardinge CHNC retrofit was created by Dbsharp

Hi I a not sure if there is a spot to share working configurations, so I am putting this here for now. I expect these might be useful for others to see what worked.

Attachment not found

Please Log in to join the conversation.

andypugh
Offline
Administrator

2 years 11 months ago #286017 by andypugh

Replied by andypugh on topic Place to post Configurations? Hardinge CHNC retrofit

You could consider putting it on the Wiki (wiki.linuxcnc.org) though it's debatable where it is most likely to be found.

Please Log in to join the conversation.

Time to create page: 0.383 seconds