Raspberry Pi GPIO Conversion CNC Software

我是一个CNC爱好者，创建了一个树莓派接口板，并编写了一个树莓派GPIO转换linuxCNC程序。欢迎使用。使用起来非常简单。您为 Raspberry Pi 定义的 GPIO 引脚输出 1，所有使用的引脚均为 0，将自动计算。我已经安装了 2.91 版本并编辑了 HAL 和 ini 配置文件，它们功能齐全，可以返回原点，可以连接手轮，并且可以用于 PWM 主轴。（英语不好，翻译）

 
 
 
 
 

软件下载

hmm the attached zip file contains an exe file.

hmm, i havent actually tried it out because I dont use rpi gpio so much right now. but it looked neat

Any idea why there is an exe file attached there?

I think it is to calculate the GPIO values ​​of the RPi, like the image in the first post.

The utility may have been written in C# and may be executable with mono, but if you don’t have it installed it’s slot of packages just to run an executable.
But I just get a bit weirded out if no source and build instructions are there. Or it’s not a package from a known source. Switching from Slackware to Debian\Ubuntu based distros has made me a bit lazy.

Anyways didn’t JT write something similar in python ?

Cant do this anymore bye all wrote:

The utility may have been written in C# and may be executable with mono, but if you don’t have it installed it’s slot of packages just to run an executable.
But I just get a bit weirded out if no source and build instructions are there. Or it’s not a package from a known source. Switching from Slackware to Debian\Ubuntu based distros has made me a bit lazy.

Anyways didn’t JT write something similar in python ?

github.com/jethornton/rpi_gpio (amd64 and armhf)
forum.linuxcnc.org/18-computer/43353-rpi...tion?start=10#226664   (arm64)