Joints_Axis9 Update Script?

More
10 years 10 months ago #66287 by Todd Zuercher
Joints_Axis9 Update Script? was created by Todd Zuercher
I installed Joints_Axis9 on a virtual machine to try to test some things out (Mint 17 is the OS). However when I try to run update_ini script on one of my configs all I get is a command not found?
Code:
todd@todd-VirtualBox ~/linuxcnc/configs/Dig5 $ ls custom.hal Dig5.hal linuxcnc.var.bak README custompanel_backup.xml Dig5.ini parport.2.pin-02-out tool.tbl custompanel.xml Dig5.ini.bak parport.2.pin-03-out update_ini custom_postgui.hal linuxcnc.var postgui_backup.hal todd@todd-VirtualBox ~/linuxcnc/configs/Dig5 $ update_ini Dig5.ini update_ini: command not found todd@todd-VirtualBox ~/linuxcnc/configs/Dig5 $

Any ideas why the script won't work?

Please Log in to join the conversation.

More
10 years 10 months ago #66290 by andypugh
Replied by andypugh on topic Joints_Axis9 Update Script?
How did you get it? If you compiled, did you run the rip-environment script?

Please Log in to join the conversation.

More
10 years 10 months ago #66300 by Todd Zuercher
Replied by Todd Zuercher on topic Joints_Axis9 Update Script?
I installed it using some of the instructions in one of the other Linuxcnc Mint topics here.

I was able to make it work now, I manually copied the update_ini script file into usr\bin\, and then it worked.

I wasn't running it as a rip. I suspect if I had been it probably would have just worked.

Please Log in to join the conversation.

Time to create page: 0.195 seconds
Powered by Kunena Forum