Hey everyone,
Worked with Bananapi M2 to for a while decided to go back to Raspberry Pi2. May someday try some more on BananaPi. But this is what I have going on now. Have created a Raspberry Pi2 image that has 12C, SPI, Serial messaging and Canbus enabled. I will try Canbus interface. Image can be downloaded here.
When selecting image file choose file type *.* , because the name of file is so long and will not show if you look for img file type.
File name is descriptive
login:pi
password:lcnc
If a bigger than 8GB SDcard is used from terminal use
sudo raspi-config
to expand file system
If you give image a try, use from terminal for latency test
latency-histogram --nobase
