RC Servo and LinuxCNC

Is it possible to control the RC servo using LinuxCNC (both are 5V logic), for example, for control and eject tool length sensor? Someone knows a sample configuration? Or i must use, for example, arduino to do this?


forum.arduino.cc/index.php?topic=14146.0

You can do it with the PWM HAL function, though not with especially high resolution.

wiki.linuxcnc.org/cgi-bin/wiki.pl?RC_Servo_Test

The resolution is not a problem if repetitive work. Working in positions on / off (tool length sensor).
Thx andypugh, my google didnt show this link (?).