Embroidery machine

More
10 years 6 months ago #73308 by mozmck
Replied by mozmck on topic Embroidery machine
Here is a quilting machine running linuxcnc. It was done by micges here on the forum.

Please Log in to join the conversation.

More
8 years 9 months ago #104344 by fabatecperu
Replied by fabatecperu on topic Embroidery machine
friend.

only the linuxcnc is used, what modifications have to be done so that the table only moves when the needle is up, or nothing is needed. I will thank you very much. Thanks a lot to everyone.

I did not find any information about micges

Please Log in to join the conversation.

More
8 years 9 months ago #104345 by fabatecperu
Replied by fabatecperu on topic Embroidery machine
Is there any manual to program the linuxcnc and do some modifications or customizations? I want to control sewing machine.

Please Log in to join the conversation.

More
8 years 9 months ago #104346 by BigJohnT
Replied by BigJohnT on topic Embroidery machine
linuxcnc.org/docs/2.7/html/

I imagine that the G code for moving is done after the needle is up ie. a bunch of short moves...

JT

Please Log in to join the conversation.

More
8 years 9 months ago #104347 by andypugh
Replied by andypugh on topic Embroidery machine
I don't see any indication that that machine only moves when the needle is up.
I imagine that you could potentially do it by using the adaptive feed HAL pin as a function of needle position.

Please Log in to join the conversation.

More
5 years 5 months ago #208292 by bevins
Replied by bevins on topic Embroidery machine
Are those head available? That is cool....

Please Log in to join the conversation.

More
5 years 2 months ago #216931 by tommylight
Replied by tommylight on topic Embroidery machine
Spam or not ?

Please Log in to join the conversation.

More
5 years 2 months ago #216945 by phillc54
Replied by phillc54 on topic Embroidery machine
The gambling ad makes me think so.

Please Log in to join the conversation.

More
5 years 2 months ago #216957 by tommylight
Replied by tommylight on topic Embroidery machine
Thank you Phill, my main PC is busy last few days so on the phone and since i have everything locked down i can not see adds or scripts or anything like that.
And i refrain from loging in on other PC's, always.
Yeah, paranoia ! :)

Please Log in to join the conversation.

  • SallyR12
  • New Member
  • New Member
More
5 years 3 weeks ago #222330 by SallyR12
Replied by SallyR12 on topic Embroidery machine
I don't think it would be very difficult, especially if you were just converting an existing machine. I have followed a detailed {link unrelated to LinuxCNC  removed by moderator}

Please Log in to join the conversation.

Time to create page: 0.107 seconds
Powered by Kunena Forum