How to put Custom M-CODES in active G-Codes

Hi, we wrote two customs "Mcode" M130 and M131.
When M130 is active, M131 is not, and viceversa.
We would to see which on is turned on, in the "active gcodes" panel.
Is it possible ?

Not without changing the Axis UI to understand your modes.

Even then, I think it only knows about things that are stored in the status structure.
What language are your M-codes in?

The M-code are really simple. They enable a pin of a custom component.

But when this happen the jog of the 4th axis is related to the movement of X and Y, and u can't jog the 4th axis manually. It will be usefull to read in which status is commanded the axis.
A solution will be put a led on the gui, if the section of active g-code is unaccessible.

Thank you

alessandro torre wrote: The M-code are really simple.

Indeed they are so simple that I am wondering why you didn't just use M64 and M65. (or possibly M3 and M5, which would show up in Active G-codes)

OH Thanks, I didn't know that M64-5 they were free.
Thank you