linuxcnc-2.7-wheezy

pachi_electronic
Topic Author
Offline
Junior Member

10 years 5 months ago #74982 by pachi_electronic

linuxcnc-2.7-wheezy was created by pachi_electronic

Hola amigos como estan.
alguien de aqui me puede hacer el favor de decirme que requicoto minimo pude funcionar el linuxcnc-2.7-wheezy.iso

Please Log in to join the conversation.

tommylight
Away
Administrator

10 years 4 months ago #75947 by tommylight

Replied by tommylight on topic linuxcnc-2.7-wheezy

If i understood correctly, the minimum requirements for running wheezy, right?
If so, i have it running on a 1000MHz AMD geode processor with 512MBram for over 5 months without restart, so it is quite usable.
Regards,
Tom

Please Log in to join the conversation.

Time to create page: 0.069 seconds