Edit file

Diederik
Topic Author
Offline
Premium Member

10 years 3 months ago #77563 by Diederik

Edit file was created by Diederik

Hi,

I have noticed that when I try to edit a file after loading it, that I cannot do it as I used to.

I upgraded to wheezy, and running on 2.7.5, and I used to go to tab-file, then edit. Then my program would open, I could edit it, and reload.

Now I have to find the file in nc-files directory, to edit.

Thanks.

Please Log in to join the conversation.

Rick G
Offline
Platinum Member

10 years 3 months ago #77570 by Rick G

Replied by Rick G on topic Edit file

In your config file you select the editor you wish to use. You can change it to mousepad which is probably installed or install gedit.

If you want to use gedit from a termianl try...

Code:

sudo apt-get update
sudo apt-get install gedit

To use mousepad edit your ini file from

Code:

EDITOR                  = gedit

Code:

EDITOR                  = mousepad

Rick G

Please Log in to join the conversation.

BigJohnT
Offline
Administrator

10 years 3 months ago #77581 by BigJohnT

Replied by BigJohnT on topic Edit file

If your using Debian and miss the Gedit editor it is simple to get it back. Open a terminal and do the following.

Code:

sudo apt-get update
sudo apt-get install -y gedit
sudo apt-get install -y gedit-plugins

Please Log in to join the conversation.

Diederik
Topic Author
Offline
Premium Member

10 years 3 months ago #77614 by Diederik

Replied by Diederik on topic Edit file

Yep. That did the trick. Thanks a lot

Please Log in to join the conversation.

Time to create page: 0.082 seconds