Linuxcncrsh problem

More
10 years 2 months ago #79605 by Jzck
Linuxcncrsh problem was created by Jzck
Linuxcncrsh stop working after a few hundred connection. I tried first from localhost, later a separate machine over ethernet.

With v2.5 ubuntu v2.7 debian just the same situation.

The remote commands are just homing and one movement on one axis.

Any idea?

Please Log in to join the conversation.

More
10 years 2 months ago #79627 by andypugh
Replied by andypugh on topic Linuxcncrsh problem
Does LinuxCNC stop, or does linuxcncrsh stop connecting?

Please Log in to join the conversation.

More
10 years 2 months ago #79702 by Jzck
Replied by Jzck on topic Linuxcncrsh problem
GUI is working properly, homing, jogging is ok.
Only the remote function hangs., restarting linuxcnc solve the problem for at about 30 minutes.

Please Log in to join the conversation.

More
10 years 2 months ago #79703 by andypugh
Replied by andypugh on topic Linuxcncrsh problem
I suspect that linuxcncrsh has so few users that you may not find any help on the forum.
It is probably best to raise a bug report here:
github.com/LinuxCNC/linuxcnc/issues

Please Log in to join the conversation.

  • seb_kuzminsky
  • New Member
  • New Member
More
10 years 2 months ago #79725 by seb_kuzminsky
Replied by seb_kuzminsky on topic Linuxcncrsh problem
Please post the code that you use to talk to linuxcncrsh.

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum