stand alone Backplot screen

More
10 years 1 month ago #80121 by snujcnc
stand alone Backplot screen was created by snujcnc
Hi
i want to start standalone Backplot (graphics) screen apart from axis gui

is there any way to run command from terminal and i can see standalone screen only backplot after my axis gui start

thanks

Please Log in to join the conversation.

More
10 years 1 month ago #80123 by andypugh
Replied by andypugh on topic stand alone Backplot screen
github.com/LinuxCNC/linuxcnc/blob/master...thon/gremlin_view.py

Looks like what you need

If calling it direct doesn't work then try

halcmd loadusr gremlin_view

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum