G28.1 not presistent

It seams that the G28.1 is not persistent between sessions. This is the normal function of it (it does not make sense to me) or it is a bug?

Using stable version 2.7.7

Thank you

The variables should be stored in the parameter file and so persistent between runs.

G28.1 stores the current absolute position into parameters 5161-5166.

Rick G

Yes, I saw that, but in my case it is not presistent between runs (close and open linuxcnc), although I believe that I saw it once persistent. But normally it is not.

Make sure your [RS274NGC]PARAMETER_FILE is correctly specified in the ini, that the var file and the config directory are writable by your user, and that the var file gets updated with your new values when exiting linuxcnc. Try running linuxcnc from the command line and look for errors printed to the terminal.