Lathe - tapered threads

More
10 years 5 days ago #82078 by emcPT
Lathe - tapered threads was created by emcPT
I have a job where I need to make tapered threads.
Looking in google I found some discussions about it, but no real example. Anyone knows if this is possible? Any example?
Thank you

Please Log in to join the conversation.

More
10 years 5 days ago #82096 by andypugh
Replied by andypugh on topic Lathe - tapered threads
You can do it with multiple G33 moves.

Please Log in to join the conversation.

More
10 years 5 days ago #82111 by jtc
Replied by jtc on topic Lathe - tapered threads


at least its possible to do some odd stuff...

Please Log in to join the conversation.

More
9 years 11 months ago #82381 by emcPT
Replied by emcPT on topic Lathe - tapered threads
Already made them:

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum