lead screw accuracy compensation

9 years 11 months ago #82881 by yvon caron

lead screw accuracy compensation was created by yvon caron

how to compensate the accuracy of my 16"x travel lead screw?
thankls

Please Log in to join the conversation.

9 years 11 months ago #82885 by andypugh

Replied by andypugh on topic lead screw accuracy compensation

If you have a way to accurately measure the true position then you can use a screw compensation file:

See the COMP_FILE and COMP_FILE_TYPE settings here:
linuxcnc.org/docs/2.7/html/config/ini-co...s__lt_num_gt_section

Please Log in to join the conversation.

Time to create page: 0.078 seconds