rtapi -- uspace -- "Using POSIX non-realtime"

There is something strange going on here, it seems.
Who owns linuxcnc-dev?
Try then check the permissions in linuxcnc-dev (should all belong to your user)
then the sequence.

Hi Andy
if there are permissions problems this maybe help.
"
avc@avc:~$ ls -l
total 60
drwxr-xr-x 4 avc avc 4096 Mar 24 20:50 Desktop
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Documents
drwxr-xr-x 3 avc avc 4096 Apr 3 10:32 Downloads
drwxr-xr-x 4 root root 4096 Mar 21 10:19 ec-debianize
drwxr-xr-x 16 root root 4096 Mar 10 10:10 ethercat-hg
drwxr-xr-x 4 avc avc 4096 Mar 10 14:08 linuxcnc
-rw

---

1 avc avc 56 Mar 24 21:59 linuxcnc_debug.txt
drwxr-xr-x 7 avc avc 4096 Mar 24 21:06 linuxcnc-ethercat
-rw

---

1 avc avc 771 Mar 24 21:59 linuxcnc_print.txt
drwxr-xr-x 21 root root 4096 Mar 10 22:14 LinuxCncRip
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Music
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Pictures
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Public
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Templates
drwxr-xr-x 2 avc avc 4096 Mar 9 19:01 Videos
avc@avc:~$
"

Must I reinstall all root programs without use sudo commands?

I don't know for sure, but my linuxcnc-dev directory is owned by my user.

I would be tempted to chmod that to yourself and see if it helps.

(Or just re-clone it without a sudo)

Is this possibly related?


forum.linuxcnc.org/9-installing-linuxcnc...i-o-privileges-error